6Pcs Glass & Acrylic & Alloy Mobile Straps, Mixed Color, 158mm, 6pcs/set (HJEW-SC00142)

Description

6Pcs Glass & Acrylic & Alloy Mobile Straps, Mixed Color

Size: about 158mm long, pendant: 12~95mm, 6pcs/set.

Electroplate Transparent Glass Beads Strands, Rondelle: Light Grey, 6x5mm, Hole: 1mm, about 85~88pcs/strand, 16.1~16.5 inch(41~42cm), 1pc;

Electroplate Glass Beads Strands, Rondelle: Lilac, 6x5mm, Hole: 1mm, about 84~85pcs/strand, 16.34~16.54 inch(41.5~42cm), 1pc;

Tibetan Silver Beads, Heart: Platinum, 5mm long, 6mm wide, 4mm thick, Hole: 1.5mm, 6pcs;

Transparent Acrylic Bead Caps: Aquamarine, 10x14x13.5mm, Hole: 1.6mm, about 1370pcs/500g, 1pc;

Electroplate Glass Beads Strands, Bicone: Clear, 6mm, Hole: 1mm, about 46pcs/strand, 10.63 inch, 12pcs;

Transparent Acrylic Bead Caps: Violet, 10x14x13.5mm, Hole: 1.6mm, about 1370pcs/500g, 1pc;

Transparent Acrylic Bead Caps: Pink, 10x14x13.5mm, Hole: 1.6mm, about 1370pcs/500g, 1pc;

ABS Imitation Pearl Beads, Butterfly: Ghost White, 11x14x3.5mm, Hole: 1.8mm, 6pcs;

Resealable Bags: Clear, 7x10cm, Unilateral Thickness: 2.3 Mil(0.06mm), 1pc;

Glass Seed Beads Cartons: Blue, 208x35mm, 1pc;

Transparent Acrylic Bead Caps: Clear, 10x14x13.5mm, Hole: 1.6mm, about 1370pcs/500g, 1pc;

Tarnish Resistant 304 Stainless Steel Eye Pins: Stainless Steel Color, 35mm, Hole: 2mm, Pin: 0.6mm, 18pcs;

Opaque Acrylic Beads, Flower: White, 10x10.5x6mm, Hole: 1.6mm, 6pcs;

Alloy Pendants, Heart: Platinum, 9.5x12.5x2mm, Hole: 1.2mm, 6pcs;

Electroplate Transparent Glass Beads Strands, Round: Yellow, 6mm, Hole: 1mm, about 98~100pcs/strand, 20.39~20.59 inch(51.8~52.3cm), 1pc;

Rack Plating Alloy Pendants, Bowknot: Platinum, 11x10.5x3mm, Hole: 1.6mm, 6pcs;

Baking Paint Pearlized Glass Pearl Round Bead Strands, Round: White, 6~7mm, Hole: 1mm, about 135~140pcs/strand, 31.4 inch, 12pcs;

Electroplate Glass Beads Strands, Round: Clear AB, 6mm, Hole: 1.2mm, about 88~91pcs/strand, 19.49 inch~20.08 inch(49.5~51cm), 7pcs;

Electroplate Transparent Glass Beads Strands, Round: Lime Green, 6mm, Hole: 1mm, about 98~100pcs/strand, 20.39~20.59 inch(51.8~52.3cm), 1pc;

Mobile Phone Strap: White, 6cm, 6pcs;

Tarnish Resistant 304 Stainless Steel Open Jump Rings: Stainless Steel Color, 20 Gauge, 5x0.8mm, Inner Diameter: 3.5mm, 18pcs;

Transparent Acrylic Bead Caps: Champagne Yellow, 10x14x13.5mm, Hole: 1.6mm, about 1370pcs/500g, 1pc;

Electroplate Transparent Glass Beads Strands, Round: Misty Rose, 6mm, Hole: 1mm, about 98~100pcs/strand, 20.39~20.59 inch(51.8~52.3cm), 1pc;

Alloy Pendant, Bowknot: Platinum, 33x20x3.5mm, Hole: 2mm, 6pcs;

Transparent Acrylic Bead Caps: Slate Gray, 10x14x13.5mm, Hole: 1.6mm, about 1370pcs/500g, 1pc.

Priced per1 Set

Please Note: Slight deviations in colors is allowed due to different display device.

DIY Phone Case Ideas

In this tutorial, we will show you various phone case DIY ideas, which provide good solutions to turn your plain phone cases into unique and creative ones at a reasonable price, and eventually give you a new and stylish phone. First of all, a plain phone case is needed.

Pull Ring Rivets

Pull ring rivets are great assistant accessories for decorating mobile phone case as well as hats, clothes, jeans, handbags, backpack, leather craft and various other DIY crafts.

How to Use Pull Ring Rivets

• The pull ring rivets consist of two parts, the round head rivets & the screw back stud.
• Prepare a clear phone case, pull ring rivets, chains and hole punch tools.
• Attach pull ring rivets to the chains.
• Punch holes on the phone case.
• Insert the screw back stud into the pre-punch hole and then rotate the rivet to tighten it.
• Finished.

Supplies Needed: Pull Ring Rivets, Phone Hand Strap Chains, Hole Punch Tools,Sequins.

DIY Resin Phone Case

The cured epoxy provides a great cushion for your phone case if your phone is dropped. Meanwhile, the dried resin is waterproof and it will protect your mobile phone from various kinds of liquids.

How to DIY:

First, apply a layer of resin on the back of the case. After the first layer dries, add decorative items such as glitter, dried flowers or decorative stickers to the back of phone case. Finally, apply another layer of resin on it and let it dry. Glitter or pigments are often added when mixing the resin.

• 
• 

Supplies Needed: UV Resin Glue, Dried Flowers.

DIY Whipped Cream Phone Case

The fake whipped cream glue is thick and performs well in keeping its shape, perfect for DIY cute phone cases, cream photo frames, cupcakes or other food craft projects.

• 
• 

Supplies Needed: Fake Whipped Cream Glue, Resin Cabochons, Polymer Clay Cabochons.

DIY Rhinestone Phone Case

If you like " bling bling phone case ", shinny rhinestones are suggested for DIY phone cases, such as glass rhinestone cabochons, rhinestone cup chains.

• 

Supplies Needed: Flat Back Glass Rhinestone Cabochons, Rhinestone Cup Chains.

There are also many other ideal items for DIY phone case, such as decorative stickers, diamond painting stickers, decorative tape, painting stencils, temporary tattoo, etc.

•