DIY Jewelry Making Finding Kits, Platinum, 7x10mm, Hole: 2mm (DIY-FS0008-39)

Description

DIY Jewelry Making Finding Kits, Platinum

Size:

Iron Ribbon Crimp Ends: about 7mm long, 10mm wide, hole: 2mm, 20pcs;

304 Stainless Steel Earring Hooks: about 20~22mm long, 21mm wide, 3mm thick, hole: 2mm; pin: 0.6mm, 20pcs;

Zinc Alloy Lobster Claw Clasps: about 6mm wide, 12mm long, hole: 1.2mm, 30pcs;

Brass Snap on Bails: about 6.5mm long, 6mm wide, 3mm thick; inner measure: 5x6mm; pin: 0.5mm, 20pcs;

Iron Screw Eye Pin Peg Bails: about 10mm long, 4mm wide, 1mm thick, hole: 2mm, about 100pcs, 10g;

304 Stainless Steel Eye Pin: about 22mm long, hole: 1.9x2mm, pin: 0.7mm, 80pcs;

Brass Crimp Beads: about 2mm in diameter, 1.2mm long, hole: 1.2mm, about 885pcs, 10g;

Iron Open Jump Rings: 4x0.7mm, inner diameter: 2.6mm, 10g;

Iron Open Jump Rings: 8x0.7mm, inner diameter: 6.6mm, 10g;

Iron Cord Ends: about 3 mm wide, 5.5~6mm long, hole: 1.2mm, about 234pcs, 7g;

Brass Rings: about 19mm in diameter, 8.5mm wide, 17mm inner diameter, 1pc.

Priced per1 Set

Please Note: Slight deviations in colors is allowed due to different display device.